View TPSCPCI200D_4434743.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

cPCI200D Series
200W 3Ux4HP DC/DC CompactPCITM Power Supply
SELECTION GUIDE Model Number cPCI200D-1 cPCI200D-2 cPCI200D-3 cPCI200D-4 Power 5V 180W 225W 180W 225W 180W 225W 180W 225W 18A1 27A 18A
1
Output Current 3.3V 27A 27A2 27A 27A2 27A 27A2 27A 27A2 12V 4A1 4A2 4A
1
IPMI -12V 4A1 4A2 4A
1
Production Status Consult Factory Consult Factory Consult Factory Consult Factory Active Active Active Active No No No No Yes Yes Yes Yes
No No Yes Yes No No Yes Yes
27A 18A
1
4A2 4A
1
4A2 4A
1
FEATURES 3Ux4HP Package 180/225W Power at 0-50C PICMG 2.11 Compliant RoHS Compliant Wide range 36-72Vdc Input Range IPMI Option 47-pin I/O Connector 70% Efficiency Hot-Swap Capable
cPCI200D-1C cPCI200D-2C cPCI200D-3C cPCI200D-4C
27A 18A
1
4A2 4A
1
4A2 4A
1
27A
4A2
4A2
INPUT CHARACTERISTICS Parameter Input Operating Voltage Input Voltage Withstand Inrush Current 36Vdc input 72Vdc input Conditions Min 36 34 20 40 Typ Max 72 75 Units Vdc Vdc Apk Apk
DESCRIPTION
The cPCI200 is a family of high-reliability, 200W, 3Ux4HP CompactPCITM power supplies operating from a nominal 48Vdc input. The use of our patented V-Series topology yields high efficiency which consequently permits packaging of this product in a compact, single card slot format (4HP). ORing diodes and current sharing allow the cPCI200 to be operated in N+n parallel-redundant configurations. Available with an IPMI interface option, the cPCI200 was designed for hot-swap, redundant configurations to support high-availability (HA) telecom applications. With a widerange input of 36-72Vdc, safety agency approvals to UL60950 and EN60950, EMI compliance to ETSI and Telcordia standards, the cPCI200 was designed with globally-deployed systems in mind. Additional features include remote sense compensation, unit enable control (EN#), output inhibit control (INH#), output fault signal (FAL#), and thermal warning signal (DEG#). LEDs are provided for visual indication of input power presence, output inhibit, and output fault condition. The 4HP package and complement of global safety agency approvals provide for an advanced, high-density, high-efficiency power solution for your CompactPCI requirements.
OUTPUT CHARACTERISTICS Parameter Output Voltage Regulation3 Temperature Coefficient PARD (V1 & V2) PARD (V3 & V4) Output Power, CPCI200D-1 & -3 20MHz bandwidth 20MHz bandwidth 50C, 300lfm airflow 70C, 300lfm airflow 50C, 300lfm airflow 70C, 300lfm airflow V, 50% load step Settling time V1 & V2 500 V1 & V2 V1&V2; full load Pri-Sec Isolation Pri-Chassis Sec-Chassis 1.5 1.5 500 50 10 125 0 0 0 0 120 Conditions Outputs V1 & V2 Outputs V3 &V4 Min -2 -10 Typ Max +4 +10 0.02 50 180 180 90 225 110 10 500 135 Units %Vnom %Vnom %/C mVp-p mVp-p W W W W %Vnom sec %Vnom mA mV %Itot kVac kVac Vac
Output Power, CPCI200D-2 & -4
Transient Response Over-Voltage Protection Minimum Load4 Remote Sense Compensation Current Share Tolerance
5
Notes: 1. Maximum combined power from outputs V1, V3, & V4 not to exceed 90W. 2. Maximum combined power from outputs V2, V3, & V4 not to exceed 90W. 3. Total regulation includes line, load, and cross regulation. 4. Minimum load requirement of 500mA is required on V1 for 180W models and on V2 for 225W models. 5. Current share circuit is primary-referenced.
For full details go to www.murata-ps.com/rohs
ISO9001
CERTIFIED
www.murata-ps.com
Technical enquiries email: sales@murata-ps.com, tel: +1 508 339 3000
cPCI200D Series.B01 Page 1 of 5
cPCI200D Series
200W 3Ux4HP DC/DC CompactPCITM Power Supply
GENERAL CHARACTERISTICS Parameter Efficiency Switching Frequency Weight Unpackaged Conditions 48Vdc input, full load 400 Min Typ 70 420 636 440 Max Units % kHz g
PROTECTION Parameter Thermal Shutdown Input Protection Over-Voltage Protection Output Overload Protection Conditions/Response Automatic recovery upon restoration to operational temperatures Internal line fuse, all models, Littlefuse R251010 or equivalent V1 & V2 125 Inception Min Typ 100 10 135 Max Units C A %Vnom
Outputs are individually protected against overloads and indefinite short circuit with automatic recovery upon removal of the fault condition. Overload response for all outputs is constant-current mode. Design Verification Testing (DVT) confirms that voltage excursions on the output buses resulting from insertion/extraction events do not exceed the specified maximum of 10%. However, routing of power and signal lines in the mating backplane is critical to minimization of such excursions. In addition, performance can be critically affected by load characteristics including resistance, negative resistance, and reactive components. While the control loop responses have been designed for optimum hot-swap performance over a wide range of characteristics, there may be instances where the voltage excursions exceed published specifications. In such cases, the control loop responses can be modified to perform optimally. Output isolation devices are present in all outputs to isolate faults within a failed power supply. Outputs V1 & V2 are capable of compensating for >50mV of line drop. Unit automatically reverts to local sensing in the event that the sense lines are opened for any reason. Unit is also protected against reversed or shorted sense leads.
Hot-Swap Capability
Output Fault Isolation Remote Sense Lead Protection
STATUS & CONTROL SIGNALS & INDICATORS Name Enable (EN#) Output Inhibit (INH#) Output Fault (FAL#) Remote Sense (RS+, RS-) Thermal Warning (DEG#) Fault Indicator LED Power Present Indicator LED Output Inhibit Indicator LED Description Short pin on connector will enable the outputs when the mating pin is grounded. Supply will not power up until this pin is engaged to its mate in the backplane. Unit output will be inhibited as pin is disengaged from the mating connector. Secondary referenced; active low, TTL compatible. Logic "0" or short circuit to output return inhibits all outputs. Secondary referenced. Open collector signal denotes that one of the output voltages has fallen below the lower regulation limit. Connection of the sense leads across the load at the desired point of regulation will compensate for voltage distribution drops up to 50mV between the output terminals of the power supply and the point of connection. The unit reverts to local sensing if the sense lines are opened for any reason. The output is protected against shorted or open leads. Applies to outputs V1 & V2. Secondary referenced. Open collector denotes a thermal warning; nominally, 10C prior to thermal shutdown. An LED will illuminate red if the output voltages are not within specification, coincident with assertion of the FAL# signal. A green LED will be illuminated when the input voltage is present and above the minimum requirement. An amber LED will be illuminated when the output is inhibited. An I2C interface board is available as a factory-installed option to provide an IPMI interface to the SMBus. Status functions include output voltage and current levels as well as the DEG# warning. Output inhibit control can also be toggled via software command. See application note ACAN-02 for the satellite controller specification, ACAN-03 for the firmware update procedure, and ACAN-04 for the test procedure.
IPMI Interface Option
www.murata-ps.com
Technical enquiries email: sales@murata-ps.com, tel: +1 508 339 3000
cPCI200D Series.B01 Page 2 of 5
cPCI200D Series
200W 3Ux4HP DC/DC CompactPCITM Power Supply
ENVIRONMENTAL CHARACTERISTICS Parameter AmbientOperatingTemperature Ambient Storage Temperature Cooling Airflow Humidity 50C ambient, full load Operating; non-condensing Storage; non-condensing Operating. De-rate operating ambient temperature by 2C per 1000ft above 5000ft. Storage Conditions De-rate output power linearly above 50C to half-power at 70C. Min 0 -20 300 10 5 -200 -200 90 90 10000 50000 Typ Max 70 85 Units C C lfm % % ft ft
Altitude
ELECTROMAGNETIC COMPATIBILITY (EMC) Characteristic Conducted Emissions Compliance EN 300 386 NEBS GR-1089
CERTIFICATIONS Agency/Characteristic UL CSA VDE CE RoHS SELV Vibration Shock Standard UL1950 CSA950 (per cUL) EN60950 LVD Directive; self-certified EN Directive 2002/95/EC; self-certified; see Selection Guide table for specific model compliance Self-certified MIL-STD-810D, Method 514.3, Procedure I; self-certified MIL-STD-810D, Method 516.3, Procedure I; self-certified
IPMI/IPMB POWER SUPPLY SATELLITE CONTROLLER FEATURES Complies with IPMI V1.5 Rev 1.1 and IPMB V1.0 Complies with PICMG 2.9 (CompactPCI Systems Management Specification) 8 analog inputs configured for monitoring voltages and currents on power supply outputs V1 - V4 Monitors the thermal sensor (DEG#) and fault signal (FAL#) Output inhibit can be controlled by IPMI commands Self Test with LED indicator (can be read and overridden by IPMI commands) 6 programmable thresholds on each analog sensor; each threshold on each sensor can be enabled to generate event messages if that threshold is crossed Thermal sensor can be enabled to generate event messages Responds to all mandatory IPMI commands and numerous optional commands as indicated in the functional specification Firmware can be upgraded via the IPMB bus Includes Device SDR's (Sensor Data Records) - These specify the type of sensor for each input (voltage, current, temperature, etc.) as well as the conversion formulas for raw ADC data to voltages, currents, etc. Includes FRU data such as model number, serial number and firmware creation date
www.murata-ps.com
Technical enquiries email: sales@murata-ps.com, tel: +1 508 339 3000
cPCI200D Series.B01 Page 3 of 5
cPCI200D Series
200W 3Ux4HP DC/DC CompactPCITM Power Supply
PACKAGE SPECIFICATIONS (PIN ASSIGMENTS)
PIN ASSIGNMENT: Pin assignment consistent with PICMGTM 2.11R1.0 specification. The table below details the PICMGTM assignment.
Pin #1 1-4 5-12 13-18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 Staging2 M M M M M M M M M M M S M M M M M M M M M M M M M M M M M L M M Signal Name V1 RTN V2 RTN V3 V4 RTN RESERVED RTN GA0 RESERVED EN# GA1 V1ADJ V1 SENSE GA2 V2ADJ V2 SENSE S RTN V1 SHARE V3 SENSE IPMB SCL DEG# INH# IPMB SDA V2 SHARE FAL# IPMB PWR V3 SHARE CGND ACN/+DC IN ACL/-DC IN Description V1 Output V1 and V2 Return V2 Output V3 Return V3 Output V4 Output Signal Return Reserved V4 Return Geographic Address Bit 0 Reserved Enable Geographic Address Bit 1 V1 Adjust3 V1 Remote Sense Geographic Address Bit 2 V2 Adjust3 V2 Remote Sense Sense Return V1 Current Share3 V3 Remote Sense IPMB Serial Clock Line Degrade Signal Inhibit IPMB Serial Data Line V2 Current Share3 Fail Signal IPMB Power Input V3 Current Share3 Chassis Grnd (Safety Grnd) AC Input Neutral/+DC Input AC Input Line/-DC Input
1. Pin numbers correspond to the female backplane connector. 2. Length Pins; S = Short Length Pins (Last Make, First Break) L = Long Length Pin (First Make, Last Break); M = Medium. 3. These functions are not used in the cPCI200D Series.
www.murata-ps.com
Technical enquiries email: sales@murata-ps.com, tel: +1 508 339 3000
cPCI200D Series.B01 Page 4 of 5
cPCI200D Series
200W 3Ux4HP DC/DC CompactPCITM Power Supply
PACKAGE SPECIFICATIONS MECHANICAL DIMENSIONS
6.68 [169.58] 6.40 [162.54] 0.1 [2.5] MIN POSITRONICS CONNEC PART NO. PCIH47M400
MODEL NO. cPCI200DC
PIN 21 3.937 -0.3 [100.00 ] +0.0
+.000 -.012
PIN 1
0.1 [2.5] MIN
AIRFLOW
MECHANICAL Shock: MIL-STD-810d, Method 516.3, Procedure 1. Vibration: MIL-STD-810d, Method 514.3, Procedure 1. Dimensions: 3U x 4HP x 160mm (see Mechanical above) EMC & SAFETY EMI: NEBS Compliant to GR1089 conducted emissions limit ETSI Compliant to ETS 300-386 conducted emissions limit Safety Agency Ratings 180 Watt 225 Watt Input Voltage: 36-72 VDC 36-72 VDC Input Current: 7A 9A Input Power: 260W 320W Agency Approvals: UL1950/CSA950, EN60950, CE Mark (Low Voltage Directive).
USA: Canada: UK: France: Germany: Japan: China: Singapore: Mansfield (MA), Tel: (508) 339-3000, email: sales@murata-ps.com Toronto, Tel: (866) 740-1232, email: toronto@murata-ps.com Milton Keynes, Tel: +44 (0)1908 615232, email: mk@murata-ps.com Montigny Le Bretonneux, Tel: +33 (0)1 34 60 01 01, email: france@murata-ps.com Munchen, Tel: +49 (0)89-544334-0, email: munich@murata-ps.com Tokyo, Tel: 3-3779-1031, email: sales_tokyo@murata-ps.com Osaka, Tel: 6-6354-2025, email: sales_osaka@murata-ps.com Shanghai, Tel: +86 215 027 3678, email: shanghai@murata-ps.com Guangzhou, Tel: +86 208 221 8066, email: guangzhou@murata-ps.com Parkway Centre, Tel: +65 6348 9096, email: singapore@murata-ps.com
Technical enquiries email: sales@murata-ps.com, tel: +1 508 339 3000
Murata Power Solutions, Inc. 11 Cabot Boulevard, Mansfield, MA 02048-1151 U.S.A. Tel: (508) 339-3000 (800) 233-2765 Fax: (508) 339-6356
www.murata-ps.com email: sales@murata-ps.com ISO 9001 and 14001 REGISTERED
10/30/08
Murata Power Solutions, Inc. makes no representation that the use of its products in the circuits described herein, or the use of other technical information contained herein, will not infringe upon existing or future patent rights. The descriptions contained herein do not imply the granting of licenses to make, use, or sell equipment constructed in accordance therewith. Specifications are subject to change without notice. (c) 2008 Murata Power Solutions, Inc.
www.murata-ps.com
cPCI200D Series.B01 Page 5 of 5

▲Up To Search▲

Price & Availability of TPSCPCI200D

	To Download TPSCPCI200D Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .